MF04818 MDF Ply 1220 mm x 2440 mm x 18 mm

Description

MF04818 MDF Ply 1220 mm x 2440 mm x 18 mm — BOLTON SKU 69468.

MF04818 mdf ply 1220mm 2440mm sheet in 18 mm thickness

Listed as MF04818 mdf ply 1220mm 2440mm, this item is a medium-density fibreboard panel supplied in the standard full-sheet format of 2440 mm by 1220 mm at a nominal thickness of 18 mm. MDF is an engineered wood-based panel produced from refined wood fibres bonded under heat and pressure, which gives it a homogeneous cross-section and faces without grain direction or knots. The practical consequence is that the board machines cleanly on all edges, takes a routed profile without tear-out, and presents a flat, uniform surface suitable for painting or laminating. At 18 mm the panel is in the usual structural thickness band for shelving, cabinet carcasses, worktop substrates and jig baseboards. The 2440 x 1220 mm sheet is the common cutting size, so it drops directly into standard panel-saw and CNC nesting layouts with minimal offcut. Detailed grade, density, moisture resistance and formaldehyde-class data are confirmed at quotation against the supply available.

Key specifications

Typical applications

An 18 mm full sheet is the working thickness for load-bearing panel work: shelving and racking decks, cabinet and locker carcasses, bench and worktop substrates, packing-case and crate panels, and shop-floor jigs, templates and routing fixtures. Because MDF has no grain direction, the same sheet can be cut in either orientation without changing the machined edge quality, which is useful where a set of parts is nested from one board.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).