ebm- papst W2E200

Product Details

From ebm-papst the W2E200 series provide unbelievable performance.
Fully meets the highest requirements of electrical safety.
With their durable design and impedance protection against overloading.
The benefits of each axial fan will propel them ahead of their competition for proficient cooling purposes.
All models are highly reliable and of excellent quality.

Diecast aluminum housing
Motor stall protection
Can be operated at both 50 Hz and 60 Hz
Terminal power connection
IP20 protection
A square axial fan designed to dissipate the heat of enclosed equipment; ideal for use in a dry location.
Can be mounted anywhere from round to square cutouts, thereby requiring minimal space for installation.
Features 230 VAC, 50 / 60 Hz motor for rotating blades, capable of producing flow rates up to 606 CFM at 2800 RPM
Cast aluminum housing with an IP44 rating ensures proper sealing against dust and moisture
UL-listed and RoHS compliant

The device is exclusively designed as a built-in device for conveying air according to its technical data.
Any other usage above and beyond this does not conform with the
intended purpose and constitutes a misuse of the device.
Customer equipment must be capable of withstanding the mechanical
and thermal stresses that can arise from this product.
This applies to the entire service life of the equipment in which this product is installed.
Conveying of air at an ambient air pressure of 800 bar to 1050 bar.
Using the device within the permitted ambient temperature range; see
chapter 3.5 Transport and storage conditions and
chapter 3.2 Nominal data.
Operating the device with all protective devices.
Observance of the operating instructions.

Using the device in the following ways is particularly prohibited..
Resonance mode, operation with heavy vibrations.
These also include vibrations that are transmitted from the customer system to the fan.
Operation in medical equipment with a life-sustaining or life-saving function.
Moving solids content in flow medium.
Connections (e.g. screws) coming loose during operation.
Moving air that contains abrasive particles.
Moving highly corrosive air, e.g. salt spray mist. Exceptions are
devices that are intended for salt spray mist and are protected accordingly.
Moving air that contains dust pollution, e.g. suctioning off sawdust.
Operating the device close to flammable materials or components.
Operating the device in an explosive atmosphere.
Using the device as a safety component or for taking on safety-related functions.
Operation with completely or partially disassembled or modified
protective features. In addition, all application options are not listed under proper use.