Notifier FSP-851R Intelligent Addressable Detector W/Flashscan

• Notifier FSP-851(A) Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors.
• Detector sensitivity can be programmed in the control panel software.
• Sensitivity is continuously monitored and reported to the panel.
• Point ID capability allows each detector’s address to be set with rotary, decimal address switches.
• providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level.
• The FSP-851R(A) is a remote test-capable detector for use with DNR(A)/DNRW duct detector housings.
• FSP-851(A) series detectors are compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).
• Sleek, low-profile design.
• Addressable-analog communication.
• Stable communication technique with noise immunity.
• Low standby current.
• Two-wire SLC connection.
• Compatible with FlashScan® and CLIP protocol systems.
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).
• Optional remote, single-gang LED accessory.
• The dual LED design provides a 360° viewing angle.
• Visible bi-color LEDs blink green every time the detector is addressed and illuminate steady red on the alarm (FlashScan systems only).
• Remote test feature from the panel.
• Walk test with address display (an address on 121 will blink the detector LED: 12-[pause]-1 (FlashScan systems only).
• Built-in functional test switch activated by an external magnet.
• Built-in tamper-resistant feature.
• Sealed against back pressure.
• Constructed of off-white fire-resistant plastic, designed to commercial standards, and offers an attractive appearance.
• 94-5V plastic flammability rating.
• SEMS screws for wiring of the separate base.
• Optional relay, isolator, and sounder bases.

Check out our Amazon.ae Store:

https://www.amazon.ae/s?me=A212XSTVVG232M&marketplaceID=A2VIGQ35RCS4UG