Pattex General Purpose SL212 Acetic Silicone (Black-Noir) - 280ml
PATTEX ACETIC SILICONE GO SL212 (BLACK) 280ml - Image 2
PATTEX ACETIC SILICONE GO SL212 (BLACK) 280ml - Image 3
PATTEX ACETIC SILICONE GO SL212 (BLACK) 280ml - Image 4

Tools & Workshop Abrasives & Surface Finishing

PATTEX ACETIC SILICONE GO SL212 (BLACK) 280ml

SKU
11426
Brand
Pattex
Category
Abrasives & Surface Finishing
Capability
Tools & Workshop
  • Suitable for sanitary like wash basins, shower cabins, kitchen, toilets, and sealing applications
  • Bonding and repairs a wide variety of joints
  • Waterproof, good chemical resistance
  • Good adhesion to a variety of non-porous substrates
  • Resistant to ultraviolet radiation.
  • Not suitable for bonding PE, PP, PTFE, Teflon, or similar
  • Plastics and acrylic glass. When bonding plastic materials and varnished/coated surfaces,
  • The user should carry out preliminary tests to ensure a reliable bond.
  • Not recommended for producing bonds in wet rooms or for surfaces with constant exposure to moisture.
  • After drying, the adhesive can be over-painted, ideally with water-based acrylic paints.
  • Preliminary tests are recommended!
  • Removal of adhesive residues:
  • Before drying, wipe off excess adhesive using a cloth
  • Soaked with acetone or cleaner’s naphtha.
  • After curing, product residues can only be removed
    mechanically.
  • All substrates must be load-bearing, sound, clean, free
    of dust, grease, and oil and not in permanent contact
    with water.
  • In order to ensure a durable, secure bond.
  • The absorption of small amounts of moisture (e.g. from
    ambient air) is required.

 

 

What to include in your RFQ →

Description

  • Pattex General Purpose Silicone Sealant is a one-component, ready-to-use silicone sealant for general-purpose sealing applications (indoor and outdoor).
  • It is suitable for bonding and repairing properties of a wide variety of joints.
  • it cures at room temperature and in the presence of air moisture to form a flexible and resistant joint.
  •  For indoor and outdoor use
  •  High initial tack (50 kg/m2)
  •  For all materials and substrates
  •  Weather- and aging-resistant
  • Solvent- and isocyanate-free
  •  Over-paintable and sandable
  •  Neutral odor
  •  Low shrinkage

 

Product Data Sheet:

1968tds (4)

Brand

Pattex

Reviews

There are no reviews yet.

Be the first to review “PATTEX ACETIC SILICONE GO SL212 (BLACK) 280ml”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date
Submit an RFQDocumentation & Quality

Related products

Explore related categories

Procurement, structured

From RFQ to documented supply path — faster, clearer, documentation-aware.

Submit an RFQ