Miniature plug in relay Harmony, 6A, 4CO

RXM miniature relays are part of Harmony Electromechanical Relays.
This is a plug-in relay to be mounted on an RXZE socket. It is a 4 C/O relay with a current rating of 6A, and a control circuit voltage of 110 V DC.
It also offers a one-step lockable test button and mechanical indicator for contact status.
The test button is activated momentarily by pushing the blue pushbutton on the front and locked by flipping up the green part.
The mechanical indicator is next to the test button, where an orange flag indicates the relay contact status.
A green LED on the front will illuminate when the relay is on. Status display with LED: clearly signal both in the day and night.
Its design is fit for industrial machines, packaging, textile, HVAC, automation control panels, low/medium voltage switchgear, and motor controls.
PLC Interfaces, power supplies, building or medical equipment, and lighting controls.
It is a green premium product and conforms to international standards and certifications like IEC, CE, UL, CSA, EAC, Lloyd’s, RoHS, and REACH.
RXM Relay should be used with an RXZE socket (screw clamp, screw connector, push-in terminal).
To protect against vibrations, a plastic/metal clamp can be added to the socket.
Protection modules and marking legends are also available.
It is sold in lots of 10 and reference includes relay only.

Technical Data Sheet

Range of product	Harmony Electromechanical Relays
Series name	Miniature
Product or component type	Plug-in relay
device short name	RXM
Contacts type and composition	4 C/O
[Uc] control circuit voltage	110 V DC
Status LED	With
Control type	Lockable test button
Utilisation coefficient	20 %

Complementary
Shape of pin	Flat
[Ui] rated insulation voltage	250 V conforming to IEC 300 V conforming to CSA 300 V conforming to UL

Contacts material	AgNi
[Ie] rated operational current	3 A at 28 V (DC) NC conforming to IEC 3 A at 250 V (AC) NC conforming to IEC
Continuous output current	5 A
maximum switching voltage	250 V conforming to IEC
resistive rated load	6 A at 250 V AC 6 A at 28 V DC
maximum switching capacity	1500 VA/168 W
minimum switching capacity	170 mW at 10 mA, 17 V
operating rate	<= 1200 cycles/hour under load <= 18000 cycles/hour no-load
Mechanical durability	10000000 cycles
electrical durability	100000 cycles for resistive load
average coil consumption	0.9 W
drop-out voltage threshold	>= 0.1 Uc
operate time	20 ms
release time	20 ms
average coil resistance	13440 Ohm at 20 °C +/- 10 %
rated operational voltage limits	88…121 V DC
Safety reliability data	B10d = 100000
Protection category	RT I
test levels	Level A group mounting
Operating position	Any position


Net weight	0.037 kg
Device presentation	Complete product

Environment
Dielectric strength	1300 V AC between contacts with micro disconnection 2000 V AC between coil and contact with basic insulation 2000 V AC between poles with basic insulation
product certifications	GOST CE UL Lloyd’s CSA
Standards	CSA C22.2 No 14 UL 508 EN/IEC 61810-1
Ambient air temperature for storage	-40…85 °C
ambient air temperature for operation	-40…55 °C
vibration resistance	3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation 5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating
IP degree of protection	IP40 conforming to EN/IEC 60529
shock resistance	10 gn for in operation 30 gn for not operating
Pollution degree	2

GORILLA WATERPROOF PATCH & SEAL CLEAR LIQUID

QT FIT8 2x58 70W 220V Quicktronic

There are no reviews yet.