Tools & Workshop Spanners & Sockets

Stahlwille 40080606 Combination Wrench 6 mm

SKU
52585
Brand
Stahlwille
Category
Spanners & Sockets
Capability
Tools & Workshop

Stahlwille 40080606 Combination Wrench 6 mm — 6 mm combination spanner from the OPEN-BOX 13 series, 105 mm long, to DIN 3113 / ISO 7738. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

Stahlwille 40080606 Combination Wrench 6 mm — BOLTON SKU 52585.

About the Stahlwille 40080606 Combination Wrench 6 Hand Tool

The Stahlwille 40080606 pairs a 6 mm open jaw with a 6 mm ring on a 105 mm shank, one step up from the smallest size in the range. Spanners in the Stahlwille OPEN-BOX 13 series are drop-forged from chrome alloy steel, hardened and oil-quenched, chrome-plated, and built with a 15° jaw angle, a ring end cranked 15° carrying the bi-hex AS-Drive profile, a reinforced jaw-to-shank transition and a double-T shank section. The 15° angle on the open jaw is what gives a small spanner its usable range of motion: turning the tool over between strokes halves the arc needed to index the fastener, so a nut can be run down in a confined pocket where a straight jaw would jam after a single flat. The round finish on the shank is more than cosmetic on a spanner this size, since there is little handle to hold and grip has to come from the surface itself. The Stahlwille 40080606 Combination hand tool is supplied as an individual spanner.

Key specifications

Manufacturer STAHLWILLE
Article number 40080606
Series OPEN-BOX 13
Width across flats 6 mm (both ends)
Overall length 105 mm
Ring profile Bi-hex with AS-Drive
Jaw angle 15°
Ring end offset 15°
Material and finish Chrome alloy steel, chrome-plated
Standards DIN 3113 / ISO 7738

Typical applications

6 mm hexagon hardware is common on small brackets, cable cleats and P-clips, cover plates, sensor mounts and light sub-assemblies. A 105 mm spanner is short enough to work inside equipment enclosures and along wiring runs where access is between other components. As with all small sizes, it is intended for controlled hand torque on fine-thread hardware rather than for breaking seized joints.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Spanners Sockets.

Reviews

There are no reviews yet.

Be the first to review “Stahlwille 40080606 Combination Wrench 6 mm”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories