Description
3M VHB F9469PC Adhesive Transfer Tape, 19 mm x 5 m — BOLTON SKU 54169.
About the 3M VHB F9469PC Adhesive Transfer Tape
In an adhesive transfer tape there is no carrier film: the adhesive is supplied on a release liner and transfers to the part when applied, leaving a bond line no thicker than the adhesive itself. This 3M VHB F9469PC industrial adhesive is supplied 19 mm wide on a 5 m roll. The short 5 m roll distinguishes this listing from the long production rolls in the same family and makes it a practical pack for maintenance, prototype and repair work, where a small quantity is consumed against a single job and shelf turnover matters more than roll economy. The 19 mm width gives a conventional bond-line width for panel, trim and plate bonding. F9469PC is a specific reference within 3M’s transfer tape range and is not interchangeable with F9473PC or other numbers in the series, so quote it in full when reordering against an existing build standard.
Key specifications
| Brand | 3M |
|---|---|
| Product designation | F9469PC |
| Construction | Adhesive transfer tape (carrier-free adhesive on a release liner) |
| Width | 19 mm |
| Roll length | 5 m |
Typical applications
A short roll of 19 mm transfer tape suits workshop and field tasks: refitting a nameplate or label, re-bonding a trim strip, laminating a gasket or foam pad, or securing a light bracket where a thin, invisible bond line is required. Because only adhesive remains in the joint, it is also used where a carrier film would be too stiff for a flexible part. The 5 m length is well matched to kits and job-specific issue rather than line production.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Structural Adhesives Epoxies.
Reviews
There are no reviews yet.