Description
3794534 Press-In Threaded Insert M4 x 5.6 Lg — BOLTON SKU 57205.
About the 3794534 Press-In Threaded Insert M4
This item is a press-in threaded insert carrying the reference 3794534, with an M4 internal thread and an overall length of 5.6 mm. Press-in inserts are installed by pressing the body into a prepared hole in the host component; the external profile keys into the surrounding material to resist rotation and pull-out, leaving a machine thread in a part whose parent material would not reliably hold an M4 fastener on its own. Because installation is by press rather than by tapping, the thread form is produced away from the assembly and is not dependent on the strength of the host material. The description above is limited to what the item designation itself states — the 3794534 reference, the M4 thread, the 5.6 mm length and the press-in installation method. Insert material, recommended host material, hole diameter and installation force are not published in the data held for this line and are therefore not stated here.
Key specifications
| Reference | 3794534 |
|---|---|
| Type | Press-in threaded insert |
| Internal thread | M4 |
| Length | 5.6 mm |
| Installation | Press-in to a prepared hole |
| BOLTON SKU | 57205 |
Typical applications
A short 5.6 mm insert body suits thin panels, brackets and moulded or cast housings where the wall section is too shallow to accept a longer insert but a load-bearing M4 machine thread is still needed. It is commonly used where a cover or access panel is removed and refitted repeatedly, since a tapped thread cut directly into a soft parent material would wear after a limited number of cycles. The short length also allows the insert to be set close to a face or edge without breaking through the opposite side.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.