Description
96990A935 Metric Press-Fit Drill Bushing with Chamfer on One End, 8 mm ID, 15 mm OD, 25 mm — BOLTON SKU 69378.
About the 96990A935 Drill Bushing, 8 mm ID
The 96990A935 Metric Press-Fit Drill Bushing is a metric drill jig bushing catalogued by McMaster-Carr under part number 96990A935. Press-fit drill bushings of this type are pressed into a matching hole in a jig or fixture plate, where the hardened bore guides drill bits and other rotary cutting tools so that holes are positioned repeatably from part to part. This size has an 8 mm inside diameter for the cutting tool, a 15 mm outside diameter for the press-fit interface, and a 25 mm overall length, with a chamfer on one end to ease installation into the fixture plate. McMaster-Carr describes its press-fit drill bushing range as hardened, ground steel that holds its shape and resists wear. Dimensional details for this specific part are taken from its catalogue designation.
Key specifications
| Part number | 96990A935 (McMaster-Carr) |
|---|---|
| Type | Press-fit drill jig bushing, chamfer on one end |
| Inside diameter | 8 mm |
| Outside diameter | 15 mm |
| Overall length | 25 mm |
| System of measurement | Metric |
Typical applications
An 8 mm-bore press-fit bushing is used in drill jigs and machining fixtures to guide an 8 mm drill or similar rotary tool during repeat hole-making operations. It suits fixture plates bored to accept the 15 mm press-fit body in fabrication, maintenance and tooling workshops.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Drills Drivers.
Reviews
There are no reviews yet.