Description
Brushless Servo, Rotation 160 Deg, Voltage 7.4V, Torque 208.3 oz-in, Speed 0.085 sec/60deg — BOLTON SKU 59358.
About the Brushless Servo Rotation 160 Deg Voltage
This SAVOX unit is a brushless servo: the output shaft position is closed-loop controlled from a standard servo command, but the motor is electronically commutated rather than using brushes and a commutator, which removes the main mechanical wear item and generally improves efficiency and heat behaviour under repeated loading. The rated figures for this variant are an operating voltage of 7.4 V, an output torque of 208.3 oz-in — about 15.0 kg·cm or 1.47 N·m — and a transit speed of 0.085 seconds per 60 degrees of travel, giving a full-travel sweep in roughly a quarter of a second. Usable rotation is 160 degrees — the servo brushless rotation 1 60 deg figure quoted in the item designation — so linkage geometry must be laid out to reach both end stops within that arc. Case size, spline pattern, gear material, connector type and the exact model designation are not carried in this listing; confirm what your airframe or rig needs when you enquire.
Key specifications
| Attribute | Value |
|---|---|
| Brand | SAVOX |
| Motor type | Brushless |
| Operating voltage | 7.4 V |
| Rated torque | 208.3 oz-in (≈15.0 kg·cm / ≈1.47 N·m) |
| Transit speed | 0.085 s per 60° |
| Rotation range | 160° |
Typical applications
Torque and speed in this class are typical of control-surface actuation on fixed-wing unmanned aircraft and larger model airframes — ailerons, elevators, rudders and flaps — and of throttle, nozzle and release-mechanism linkages. The brushless motor makes it a reasonable choice for duty cycles that would wear a brushed servo quickly, such as a surface that is continuously trimmed by an autopilot. The same output can drive camera and sensor gimbals, small robotic joints and actuated test fixtures where a 160° arc is sufficient and a 2S (7.4 V) supply is available.
Browse more in Airframe Propulsion.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.