Description
126-3958 Damper Isolator M6x20x25x25mm Male/Male Rubber — BOLTON SKU 64876.
About the 126-3958 Damper Isolator M6x20x25x25mm Male/Male
This isolator is the RS PRO anti-vibration mount listed under RS stock number 126-3958. It is a cylindrical bobbin type with a male M6 stud at each end bonded into a natural rubber body 25 mm in diameter and 25 mm high, with 20 mm stud length, as reflected in the item designation. RS publishes a compression load rating of 27.36 kg for this variant, placing it in the middle of the M6 male-to-male range, where adjacent part numbers cover roughly 13 kg to 43 kg. Mounts of this construction work by loading the rubber element in compression and shear between two bolted surfaces, decoupling the mounted equipment from structure-borne vibration and reducing transmitted noise. RS lists the range for use with static generator engines, compressors, motors, electronic control panels and engine mounts. Load per mount should be checked against the number of mounting points before selection.
Key specifications
| Supplier reference | RS PRO 126-3958 |
|---|---|
| Type | Cylindrical anti-vibration mount, male-to-male bobbin |
| Thread size | M6 both ends |
| Stud length | 20 mm |
| Body diameter | 25 mm |
| Body height | 25 mm |
| Body material | Natural rubber |
| Compression load rating | 27.36 kg |
Typical applications
This size suits panel-mounted electronics, small compressors, pumps and fan assemblies where each mount carries a share of a load in the tens of kilograms. Male studs at both ends allow the mount to be bolted directly between a chassis rail and an equipment foot without extra brackets. The 25 mm body height provides usable deflection for isolating running machinery inside enclosures, skids and generator sets.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.