Description
ISO 4032 M10 Hexagon Nuts — BOLTON SKU 69001.
About the ISO 4032 M10 Hexagon Nuts
ISO 4032 covers hexagon regular nuts, style 1, in product grades A and B, and is the standard normally called up for metric hexagon nuts on general engineering assemblies. Supplied as iso 4032 m10 nuts, this line is the M10 size within that standard: coarse thread M10 × 1.5, a width across flats of 16 mm, a maximum nut height of 8.4 mm and a minimum width across corners of 17.77 mm. Those dimensions are what make the nut interchangeable between suppliers and what determine the tooling needed to drive it — a 16 mm spanner or socket in this case. ISO 4032 fixes geometry only; it does not by itself set the material, property class or coating, which are specified separately on the order. BOLTON’s catalogue record for this line does not state them, so they should be confirmed on the RFQ.
Key specifications
| Attribute | Value |
|---|---|
| Standard | ISO 4032 — hexagon regular nuts, style 1 |
| Thread | M10 × 1.5 (coarse) |
| Width across flats (s) | 16 mm |
| Width across corners (e), minimum | 17.77 mm |
| Nut height (m), maximum | 8.4 mm |
| Drive size | 16 mm spanner / socket |
| BOLTON SKU | 69001 |
Typical applications
M10 hexagon nuts to ISO 4032 are a general structural and mechanical size, used with M10 bolts, screws and studs on brackets, frames, machine guards, base plates and equipment mountings. Because the standard fixes dimensions but not material, the same M10 nut is ordered in carbon steel, in stainless, or with a specified plating, depending on the environment the joint sits in. State the required property class, material and finish with your enquiry so the correct variant is quoted against your assembly.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.