Description
96990A907 Press-Fit Drill Bushing with Head, 2 mm ID, 5 mm OD, 4 mm Long — BOLTON SKU 69376.
About the 96990A907 Drill Bushing, 2 mm ID Headed
Catalogue number 96990A907 identifies a headed press-fit drill bushing with a 2 mm inside diameter, 5 mm outside diameter and 4 mm length. Press-fit drill bushings are hardened guide sleeves that are pressed into a reamed hole in a jig plate or fixture; the bore then guides the drill bit so holes are placed accurately and repeatably, while protecting the jig plate from wear. The head on this pattern seats against the face of the jig plate, positively locating the bushing depth and resisting push-through under drilling load. With its 2 mm bore, this bushing is sized for small-diameter drilling work, and the short 4 mm body suits thin jig plates. Material and hardness data are confirmed against the manufacturer record at quotation.
Key specifications
| Catalogue number | 96990A907 |
|---|---|
| Type | Press-fit drill bushing, with head |
| Inside diameter | 2 mm |
| Outside diameter | 5 mm |
| Length | 4 mm |
Typical applications
Headed bushings in this small size are used in drill jigs for precision small-hole work — pilot holes, rivet pilot drilling and instrument or electronics fixturing — where a 2 mm drill must be guided accurately through a thin jig plate. The head face also acts as a wear surface where the drill is fed repeatedly.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Drills Drivers.
Reviews
There are no reviews yet.