Description
97060A302 Metric Press-Fit Drill Bushing, 10 mm ID, 15 mm OD, 20 mm Long, Chamfer on Both Ends — BOLTON SKU 69377.
About the 97060A302 Drill Bushing, 10 mm ID
The 97060A302 Metric Press-Fit Drill Bushing 10 mm bore variant has a 10 mm inside diameter, 15 mm outside diameter and 20 mm length, chamfered on both ends. Press-fit bushings of this headless pattern are pressed flush into a reamed hole in the jig or fixture plate, where the hardened bore guides the drill and protects the plate from wear. The chamfer on both ends eases pressing into the plate and helps lead the drill into the bore, and because the bushing is symmetrical it can be installed from either side. The 20 mm length gives the drill a long guiding engagement relative to the 10 mm bore, supporting hole position and perpendicularity in thicker workpieces. Material and hardness data are confirmed against the manufacturer record at quotation.
Key specifications
| Catalogue number | 97060A302 |
|---|---|
| Type | Metric press-fit drill bushing, headless |
| Inside diameter | 10 mm |
| Outside diameter | 15 mm |
| Length | 20 mm |
| End form | Chamfer on both ends |
Typical applications
A 10 mm bore bushing of this length is used in drill jigs for structural fastener holes and bolt-hole patterns in plate and machined parts, where the flush headless fit lets the jig face sit directly against the workpiece. Fitting flush from either side makes it practical in double-sided fixtures.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Drills Drivers.
Reviews
There are no reviews yet.