Description
96977A242 Press-Fit Drill Bushing with Head, 6 mm ID, 10 mm OD, 17 mm Long — BOLTON SKU 69379.
About the 96977A242 Drill Bushing, 6 mm ID Headed
Catalogue number 96977A242 identifies a headed press-fit drill bushing with a 6 mm inside diameter, 10 mm outside diameter and 17 mm length. The bushing is pressed into a reamed hole in a jig or fixture plate; its hardened bore then guides the drill bit for accurate, repeatable hole placement while shielding the plate from drill contact. The head seats on the jig-plate face, setting installation depth positively and preventing the bushing from being pushed through under feed pressure — useful where drilling loads are higher or the press fit may see repeated service. The 17 mm body length provides substantial guiding engagement for a 6 mm drill, supporting perpendicularity on deeper holes. Material and hardness data are confirmed against the manufacturer record at quotation.
Key specifications
| Catalogue number | 96977A242 |
|---|---|
| Type | Press-fit drill bushing, with head |
| Inside diameter | 6 mm |
| Outside diameter | 10 mm |
| Length | 17 mm |
Typical applications
A 6 mm headed bushing of this proportion is typical of jigs for drilling fastener and dowel holes in mechanical assemblies, where the head keeps the bushing captive through repeated drill cycles. It suits thicker jig plates and production fixtures that see sustained use rather than one-off drilling.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Drills Drivers.
Reviews
There are no reviews yet.