Description
Solid Carbide Fiberglass Router, Diamond Coated, D6 x 75L, 30mm Flute Length — BOLTON SKU 54257.
About the Solid Carbide Fiberglass Router, Diamond Coated, D6
This Solid Carbide Fiberglass Router Diamond Coated cutter has a 6 mm cutting diameter, 75 mm overall length and 30 mm flute length. The solid carbide body with diamond coating is the standard construction for routing abrasive glass-fibre laminates, where uncoated edges wear rapidly. What distinguishes this variant is its working reach: the 30 mm flute engages the full thickness of heavier laminates and stacked panels in one pass, and the 75 mm overall length lets the tool extend from the collet across steps, flanges and fixture edges that a stubby cutter cannot clear. The 6 mm diameter also matches common 6 mm collets on die grinders and spindles, and its larger core takes heavier trimming feeds than the small-diameter sizes in the same series. Cut edges in fibre-reinforced plastic depend on sharp, wear-resistant flutes to avoid fraying, which the diamond coating is applied to preserve.
Key specifications
| Tool type | Fibreglass router (rotary cutter) |
|---|---|
| Cutting diameter | 6 mm |
| Overall length | 75 mm |
| Flute length | 30 mm |
| Body material | Solid tungsten carbide |
| Coating | Diamond |
Typical applications
The 6 mm x 30 mm-flute size handles perimeter trimming, large cut-outs and edge profiling in thicker GFRP mouldings, panels and structural laminates. Its longer reach suits work over curved surfaces and deep sections in composite fabrication and repair shops.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.