Description
Mitutoyo 570-248 Absolute Digimatic Height Gauge Range 0-40″/0-1000mm — BOLTON SKU 60047.
About the Mitutoyo 570-248 Height Gauge, 0-40
The 570-248 digimatic height gauge is a Series 570 ABSOLUTE Digimatic instrument with a measuring range of 0 to 1000 mm, equivalent to 0 to 40 inches. It uses a built-in ABSOLUTE linear encoder, so the instrument retains its origin and does not need the reference point to be re-established each time it is switched on. Display resolution is 0.01 mm, or 0.0005 in when working in imperial, on a six-digit LCD. Within the Series 570 range this model is the dual inch and millimetre version, distinguishing it from the metric-only 570-230. A fine-adjustment mechanism is provided for precise positioning of the slider against the work, and the gauge is supplied with a carbide-tipped scriber. SPC data output allows readings to be sent directly to a data collection system rather than transcribed by hand. The instrument runs from an SR44 battery with an expected life of approximately 5,000 hours in normal use.
Key specifications
| Measuring range | 0-1000 mm / 0-40 in |
|---|---|
| Resolution | 0.01 mm / 0.0005 in |
| Scale type | ABSOLUTE linear encoder |
| Display | 6-digit LCD |
| Units | Inch and millimetre |
| Scriber | Carbide-tipped, supplied |
| Data output | SPC output |
| Battery | SR44, approx. 5,000 hours |
Typical applications
A 1000 mm range height gauge is a surface-plate instrument for larger fabricated and machined parts — checking hole centres, step heights, flange and boss positions on assemblies too tall for a 300 or 600 mm gauge. The ABSOLUTE encoder suits inspection routines where the instrument is switched on and off repeatedly through a shift, and the SPC output supports recorded first-article and in-process inspection. The carbide scriber allows the same instrument to be used for marking out as well as measurement.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Dimensional Layout Measurement.
Reviews
There are no reviews yet.