Description
Digital Torque Wrench, 3/8″ Drive, 27-135 Nm — BOLTON SKU 50464.
About the Digital Torque Wrench, 3/8″ Drive, 27-135 Nm
This digital torque wrench 3/8dr-27nm-135nm covers a working range of 27 Nm to 135 Nm, which corresponds to approximately 20 to 100 lbf·ft. It carries a 3/8 inch square drive, the mid-size drive standard that accepts 3/8 inch sockets, extensions and adaptors directly and larger or smaller sockets through a step adaptor. A digital wrench differs from a click-type wrench in that applied torque is measured continuously and shown on a display, so the reading can be observed during tightening rather than inferred from a mechanical release. The stated range is the calibrated working range of the instrument: torque values below the lower limit of 27 Nm fall outside it, and a smaller-range wrench should be used for those joints. As a measuring instrument, the wrench is intended to be used within a periodic calibration regime rather than as a general-purpose breaker bar.
Key specifications
| Attribute | Value |
|---|---|
| Instrument type | Digital (electronic) torque wrench |
| Drive size | 3/8 inch square drive |
| Torque range | 27 – 135 Nm |
| Range (imperial equivalent) | Approx. 20 – 100 lbf·ft |
| Readout | Digital display |
Typical applications
A 3/8 inch drive wrench in the 27–135 Nm band suits controlled tightening of medium-duty threaded joints — chassis and bracket fixings, gearbox and pump covers, wheel and hub hardware on light vehicles, and equipment assembly where a torque figure is specified on a drawing. Digital readout makes it suitable for work that must be recorded against a torque specification, and for progressive tightening sequences where the value is read at each pass. Not intended for joints whose specification falls below 27 Nm.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Spanners Sockets.
Reviews
There are no reviews yet.