Description
PINE BEAM 80mmx110mmx2.4m — BOLTON SKU 56859.
About the PINE BEAM 80mmx110mmx2.4m
This item is a sawn pine beam supplied in a single nominal size: an 80 mm by 110 mm rectangular cross-section, 2.4 metres long. Pine is a softwood, so it is worked easily with ordinary site and workshop tooling and accepts nails, screws and structural connectors readily. Because it is a sawn timber product, the cross-sectional dimensions are nominal, and the surface finish, moisture content and any preservative treatment are determined by the batch supplied; where a specific grade, moisture content or treatment is required, this should be stated on the RFQ so the correct material is sourced rather than assumed. The pine beam 80mmx110mmx2 4m size is quoted per piece. Cutting, drilling and fixing follow ordinary carpentry practice, and no special handling is needed beyond normal timber storage clear of ground contact and standing water.
Key specifications
| Attribute | Value |
|---|---|
| Material | Pine (softwood timber) |
| Form | Sawn beam |
| Nominal cross-section | 80 x 110 mm |
| Length | 2.4 m |
| Dimensional basis | Nominal sawn size |
| BOLTON SKU | 56859 |
Typical applications
Sections of this size are commonly used for crating and heavy packing cases, dunnage and load bracing, formwork and temporary works, pallet bearers, and framing for stands, enclosures and workshop fixtures. A 2.4 m length cuts down into shorter bearers and studs with little waste. Where the timber is destined for export packing, buyers should confirm on the RFQ whether ISPM 15 treated and marked material is required.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.