Filtrine PF140TRIP In-line Particulate Water Filter

Description

• F MODEL IN-LINE WATER FILTERS
  Filtrine’s PF Model Filters are the ideal solution for water treatment
  when turbidity, particulates, and suspended solids are present in
  make-up water.
  • All Stainless Steel Housing
  Heavy duty 10 ga stainless steel housing rated at 125 psi working
  pressure. Built to outlast the piping in the building.
  • Unique “DualSeal” Double O-Ring Seal Filter Elements
  Conventional cartridge-type filters depend upon the compression of the
  cartridge top and bottom to effect a seal. However, tests indicate, that
  the average cartridge loses some rigidity when wet, making it impossible
  to maintain this original seal.
  PF cartridges, however, do not rely on compression. Instead, using an
  innovative “DualSeal” double O-ring design whereby the cartridge
  slides over a center standpipe, they are sealed top and bottom by
  internal O-rings to insure first-day effectiveness for the life of the
  cartridge.
  • PF Cartridges Provide Complete Particle Filtration
  PF cartridges remove sediment and other suspended particles
  using cartridges made from thermally-bonded microfibers of polypropylene.
  “Graded Depth“ construction provide element fibers that
  are wound more tightly toward the core of the cartridge.
  PF MODEL FILTERS ARE EASY TO SERVICE filtration and have a longer service life.

    TO INSTALL OR REPLACE THE CARTRIDGE

• Note the date on the change schedule tag
• Close water inlet and outlet valves
• Unscrew BAR HANDLE
• Remove YOKE and COVER
• Remove the FILTER CARTRIDGE from the standpipe by sliding the cartridge up and out.
• Note the accumulation of impurities removed from your water supply.
• Slide the new filter cartridge over the standpipe and down into the filter body.
• Push the element down as far as it will to cover the entire standpipe.
• Replace COVER and COVER O-ring (if necessary).
• Screw on BAR HANDLE and YOKE hand tight.
•  Open inlet and outlet valves.