Sikacrete®-114 AE is a one-component, free-flowing, high-strength, non-shrink, cement-based micro-concrete with a maximum aggregate size of 10 millimeters.
Suitable for use in hot and tropical climatic conditions.
One component requires the addition of water only
Reduced waste and risk of mixing failures
Easy to mix, apply and finish
Economical
Excellent adhesion
Shrinkage compensated
Rapid strength development
Compatible with the properties of typical concrete
Sikacrete -114 AE is used for the structural repair of deteriorated concrete.
It is ideal for casting sections or members, where the volumes are required.
Large for conventional grouts, and too small and inaccessible for normal concreting applications.
A typical application is the re-profiling of damaged concrete members, using formwork.
Also suitable for base plate grouting where the thickness exceeds 75 millimeters.
Concrete surfaces should be clean, sound, and free from oil, grease, cement laitance, and all loosely adhering particles.
Absorbent surfaces should be saturated thoroughly with clean water.
Metal surfaces (iron and steel) should be free from scale, rust, oil, and grease. Dampen all concrete surfaces thoroughly with clean water prior to application.
Before pouring, however, let the mixed grout stand for 2 to 3 minutes after mixing with the mixing water to allow entrapped air to escape.
Maintain sufficient hydrostatic head to keep the product flowing.
Provide channels for the air to escape during grouting.
Protect from rain until the initial set has been achieved.
Be the first to review “Sikacrete-114 AE” Cancel reply
Documentation & RFQ readiness
BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:
The exact manufacturer part number (MPN) and quantity required
Any drawing, specification or standard that applies, where relevant
Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
Reviews
There are no reviews yet.