Description
Stanley E-46530 Try Square, 150 mm — BOLTON SKU 57605.
About the Stanley E-46530 Try Square 150 mm
The Stanley E-46530 Try technical component is catalogued by Stanley as a try square with a 150 mm blade. A try square is a two-part marking and checking gauge: a blade fixed at exactly 90 degrees to a thicker stock. Holding the stock firmly against a reference edge lets the user scribe a line square to that edge; holding the blade against a face and looking for light under it is the standard way of confirming that an edge, shoulder or end has been cut square. Blade length is quoted as the usable length measured out from the working face of the stock, and it is the only characteristic that separates this reference from the longer squares in the same family. At 150 mm this is the shortest of the common sizes, chosen for close work on small sections, bench joinery and layout inside confined assemblies where a longer blade would foul surrounding material.
Key specifications
| Brand | Stanley |
|---|---|
| Manufacturer reference | E-46530 |
| Tool type | Try square |
| Blade length | 150 mm |
| Reference angle | 90 degrees |
| Construction | Fixed blade and stock |
Typical applications
A 150 mm try square is used for squaring small workpieces, marking cut lines across narrow stock and checking the shoulders of joints. The short blade makes it the practical choice for bench work, pattern making and fitting operations inside enclosures and frames. In maintenance and fabrication settings it also serves as a quick check that a machined face or a welded bracket sits square before further work is committed to it.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.