Avionics & Electronics Heat-Shrink & Sleeving

M23053/5-207-C Tubing, Heat-Shrinkable, Thin wall, Fluid Resistant, 3/8″ 125 °C, Clear

MPN
M23053/5-207-C
SKU
58836
Category
Heat-Shrink & Sleeving
Capability
Avionics & Electronics

M23053/5-207-C Tubing, Heat-Shrinkable, Thin wall, Fluid Resistant, 3/8″ 125 °C, Clear — thin-wall, fluid-resistant heat-shrinkable polyolefin tubing to the SAE-AMS-DTL-23053/5 family, 3/8 in supplied size, clear. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

M23053/5-207-C Tubing, Heat-Shrinkable, Thin wall, Fluid Resistant, 3/8″ 125 °C, Clear — BOLTON SKU 58836.

About the M23053/5-207-C Heat Shrink Tubing

M23053/5-207-C is a heat-shrinkable insulation sleeving designation within the SAE-AMS-DTL-23053/5 specification family (formerly MIL-DTL-23053/5), which covers flexible, crosslinked polyolefin tubing for electrical insulation. Tubing in this family is supplied in an expanded state and recovers to a smaller diameter when heat is applied, with a nominal 2:1 shrink ratio, making it suitable for insulating wire and cable, providing strain relief, and protecting splices, terminations and component bodies. This dash number is a thin-wall, fluid-resistant grade with a supplied size of 3/8 in and a clear finish, rated 125 °C as designated. The /5 detail sheet is one of the most widely specified heat-shrink materials in aerospace and defence wiring practice, with the dash number encoding the size and colour variant of the tubing.

Key specifications

Type Heat-shrinkable insulation sleeving (tubing)
Specification family SAE-AMS-DTL-23053/5 (formerly MIL-DTL-23053/5)
Material Flexible, crosslinked polyolefin
Shrink ratio 2:1 (nominal)
Supplied size 3/8 in (as designated)
Wall / grade Thin wall, fluid resistant
Temperature rating 125 °C (as designated)
Colour Clear

Typical applications

Heat-shrink tubing in this specification family is used throughout aerospace and defence wire harnessing, avionics bench work, UAV/UAS electrical integration and MRO workshops. Typical uses include insulating splices and terminations, jacketing wire bundles and breakouts, and providing strain relief and identification at connector back-ends.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Heat-Shrink & Sleeving.

Reviews

There are no reviews yet.

Be the first to review “M23053/5-207-C Tubing, Heat-Shrinkable, Thin wall, Fluid Resistant, 3/8″ 125 °C, Clear”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories