Description
MWDM2L21P4K518S Micro-D 21 Pin Insulated Wire Pigtails — BOLTON SKU 64997.
About the MWDM2L21P4K518S Micro-D, 21-Pin Pigtails
The Micro-D form factor places its contacts on a 1.27 mm (0.050 in) grid inside a miniature D-shaped shell. What distinguishes this MWDM2L21P4K518S micro-D connector from a bare connector is the termination: it is delivered as a pigtail assembly, with 21 pin contacts already terminated to insulated wires that emerge from the rear of the shell. That places the part in harness and cable scope rather than in loose contacts and tooling — the wires are cut back, stripped and joined into the loom by the harness builder, and no Micro-D crimp or insertion tool is required on site. The complete designation MWDM2L21P4K518S encodes the wiring style and lead build alongside the 21-pin shell size and must be quoted in full.
Key specifications
| Full designation | MWDM2L21P4K518S |
|---|---|
| Connector type | Micro-D with insulated wire pigtails |
| Contact count | 21 |
| Contact gender | Pin (male) |
| Contact spacing | 1.27 mm (0.050 in) Micro-D grid |
| BOLTON SKU | 64997 |
Typical applications
Pigtailed connectors of this kind are ordered when a harness is built up from the connector outwards — typical of repair and retrofit work, prototype looms and short production runs where the cable route is measured on the airframe or chassis rather than drawn in advance. The 21-pin count covers a single instrument, radio or servo interface, and because the wires arrive already terminated the build reduces to splicing, sleeving and back-shell fitting, which shortens bench time in a workshop that does not hold Micro-D contact tooling.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Wire & Cable.
Reviews
There are no reviews yet.