Description
50-37-5073 Connector, 2.50 mm SPOX Crimp Housing, 7-Way — BOLTON SKU 61360.
About the 50-37-5073 Molex SPOX Housing, 2.50mm 7-Way
The 50-37-5073 SPOX crimp housing is a wire-to-board housing on a 2.50 mm contact pitch with seven circuits. A crimp housing is the moulded insulator half of a wire-to-board set: individual crimp terminals are first applied to the discrete wires and are then inserted into the housing cavities, where they latch in place. The housing is supplied on its own, so the matching crimp terminals and the mating board-mount header are separate order lines and should be listed on the same enquiry if a complete connection set is required. The 2.50 mm pitch places this housing between the fine-pitch signal families and the larger power-oriented ranges, which is why it is commonly chosen for internal harnesses that carry both control signals and modest supply currents. Electrical ratings depend on the terminal and wire gauge selected.
Key specifications
| Part number | 50-37-5073 |
|---|---|
| Product type | Crimp housing (wire-to-board) |
| Series | SPOX |
| Pitch | 2.50 mm |
| Circuits | 7 |
| BOLTON SKU | 61360 |
Typical applications
Seven-way housings on this pitch are typical of internal board-to-wire links inside control boxes, power-distribution assemblies, instrument panels and small electronic enclosures, where a single connector has to carry a supply pair plus several signal or sense lines. The crimp construction suits harnesses that are built to length and later serviced, since individual circuits can be extracted and replaced rather than replacing the whole loom.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.