Description
CRCW0805110KFKEA-RES; 110k 0,125W ±1% THK FILM CHIP (0805) — BOLTON SKU 67773.
About the CRCW0805110KFKEA Resistor, 110k 1% 0.125W
The Vishay global part number resolves field by field: CRCW0805 identifies the D12/CRCW0805 e3 standard thick film chip resistor, 110K encodes the resistance using the R/K/M decimal convention (110 kΩ), F sets the resistance tolerance at ±1%, K sets the temperature coefficient of resistance at ±100 ppm/K, and EA is the lead-free packaging code for a 5,000-piece 180 mm (7-inch) reel. The 110K field is read as 110 thousand ohms, an E96 decade value. In the 0805 case the datasheet gives a rated dissipation of 0.125 W at 70 °C, a maximum operating voltage of 150 V AC RMS or DC and a one-minute insulation withstand of 200 V against the ambient. The operating temperature range is −55 °C to +155 °C with a permissible film temperature of 155 °C. The resistive element is a laser-trimmed cermet film on alumina under a protective coating, with pure matte tin over nickel plating on the terminations and AEC-Q200 qualification.
Key specifications
| Manufacturer part number | CRCW0805110KFKEA |
|---|---|
| Manufacturer | Vishay Dale |
| Resistance | 110 kΩ |
| Tolerance | ±1% (code F) |
| Temperature coefficient | ±100 ppm/K (code K) |
| Case size | 0805 (D12/CRCW0805 e3) |
| Rated dissipation at 70 °C | 0.125 W |
| Maximum operating voltage | 150 V AC RMS / DC |
| Operating temperature | −55 °C to +155 °C |
| Packaging code | EA — lead-free, 5,000 pieces on a 180 mm reel |
Typical applications
High-value resistors of this order are used where current draw has to stay low: upper legs of high-impedance voltage dividers, feedback networks around regulators and references, bleed and pull-down paths, and RC timing networks where a long time constant is wanted from a modest capacitor. At 110 kΩ the dissipation in most signal-level circuits is a small fraction of the 0.125 W rating, so the practical limits are the ±1% tolerance and the ±100 ppm/K drift rather than power.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.