Avionics & Electronics Circular / Rectangular Connectors

PUDP-12V-S Connector Receptacle Housing, 12 Position, 2mm

MPN
PUDP-12V-S
SKU
61937
Category
Circular / Rectangular Connectors
Capability
Avionics & Electronics

PUDP-12V-S Connector Receptacle Housing, 12 Position, 2mm — JST PUD series free-hanging crimp receptacle housing, 12 positions in 2 rows, 2 mm pitch, PBT, natural. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

PUDP-12V-S Connector Receptacle Housing, 12 Position, 2mm — BOLTON SKU 61937.

About the PUDP-12V-S Housing, 12 Position, 2mm Pitch

The PUDP-12V-S receptacle housing is the cable-side shell of JST’s PUD wire-to-board system, holding twelve crimp contacts in two rows on a 2 mm pitch. It is a free-hanging housing: contacts are crimped to conductors in the range 28-22 AWG and then inserted from the rear until they latch. The housing is moulded in polybutylene terephthalate in a natural finish and measures 8.3 mm wide by 14 mm long. Keying features guide the shell onto the matching PUD header so it can only enter one way, and a secure locking device retains it once mated, confirmed by an audible click. The series is designed to give a stable electrical connection at low insertion force and is specified to hold that connection under vibration, pinching and dry-circuit conditions. Contacts are ordered separately to match the wire gauge used.

Key specifications

Manufacturer JST
Series PUD
Type Free-hanging crimp receptacle housing
Positions 12, 2 rows
Pitch 2.0 mm
Wire range 28-22 AWG
Housing material Polybutylene terephthalate (PBT)
Colour Natural
Dimensions 8.3 mm wide × 14 mm long

Typical applications

This housing terminates the loom end of a twelve-way internal interconnect — sensor and control harnesses inside instrument and equipment enclosures, board-to-board tails, and cabling between a controller and its front panel or display. Because contacts crimp to 28-22 AWG, the same connector can carry a mix of fine signal wire and slightly heavier supply conductors. The audible-click latch and keyed entry make it suitable for assemblies that are built or serviced quickly and must be verified as fully seated without a visual inspection.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Reviews

There are no reviews yet.

Be the first to review “PUDP-12V-S Connector Receptacle Housing, 12 Position, 2mm”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories