Avionics & Electronics Backshells & Strain Relief

880811-2 Boot, Straight, Nylon 6/6, Black

MPN
880811-2
SKU
65165
Category
Backshells & Strain Relief
Capability
Avionics & Electronics

880811-2 Boot, Straight, Nylon 6/6, Black — TE Connectivity cable-support boot for 3-way AMP SUPERSEAL 1.5 male connector housings. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

880811-2 Boot, Straight, Nylon 6/6, Black — BOLTON SKU 65165.

About the 880811-2 Straight Boot, Nylon 6/6, Black

The 880811-2 straight connector boot is a TE Connectivity accessory for the AMP SUPERSEAL 1.5 mm connector series. It is a straight cable-support cover for a three-position male housing, listed in black and specified in nylon 6/6. The boot fits over the rear of the assembled housing and closes the area where the wires leave the connector, supporting the cable bundle and transferring bending and pull loads away from the individual crimped contacts and their wire seals. The three-way SUPERSEAL 1.5 interface it serves is listed by TE with a nominal current rating of 14 A, and the sealed connector system is rated to IP67 when correctly assembled with its seals. The part is RoHS compliant and lead-free. It is a mechanical accessory rather than a sealing element in its own right, so it is used together with the wire seals and housing seal specified for the SUPERSEAL 1.5 family.

Key specifications

Manufacturer TE Connectivity
Part number 880811-2
Type Connector boot / cable support cover
Orientation Straight
Connector series AMP SUPERSEAL 1.5 mm
Positions served 3, male housing
Material Nylon 6/6
Colour Black
Compliance RoHS compliant, lead-free

Typical applications

Straight boots are used where the loom leaves a connector in line with the mating axis, such as sensor and actuator leads on vehicles, generator sets and ground-support equipment. The three-way SUPERSEAL 1.5 interface is common on pressure, temperature and position senders, so this boot is normally ordered alongside those harness builds. It also tidies exposed cable entries on panel-mounted housings.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Backshells & Strain Relief.

Reviews

There are no reviews yet.

Be the first to review “880811-2 Boot, Straight, Nylon 6/6, Black”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories