Description
Bosch GO 2.0 Professional Kit — BOLTON SKU 65808.
About the Bosch GO 2.0 Professional Kit
The bosch go 2 0 professional kit is a compact 3.6 V lithium-ion screwdriver supplied together with a 33-piece screwdriver bit set. The tool runs at a no-load speed of 360 rpm and delivers a maximum torque of 5 Nm in hard joints and 2.5 Nm in soft joints, with five selectable torque settings for controlled fastening across different materials. Bit changes are made through a 1/4 in internal-hex tool holder, so standard insert bits can be used alongside the bits included in the kit. Operation is push-start: the motor engages when the tool is pressed against the fastener, and the Smart Stop function halts drive once the preset torque is reached. Bosch rates the tool for screws up to 5 mm diameter, which places it in the assembly, panel and light-fitting class of work rather than structural fastening.
Key specifications
| Battery voltage | 3.6 V lithium-ion |
|---|---|
| No-load speed | 360 rpm |
| Maximum torque | 5 Nm (hard) / 2.5 Nm (soft) |
| Torque settings | 5 |
| Tool holder | 1/4 in internal hex |
| Maximum screw diameter | 5 mm |
| Supplied with | 33-piece screwdriver bit set |
| Control features | Push start, Smart Stop |
Typical applications
The low 5 Nm torque ceiling and 5 mm screw limit suit repetitive light assembly: enclosure lids, rack and panel fixings, cable-tray covers, instrument housings and furniture build-ups. The 1/4 in hex holder and the 33-bit set make it useful as a shared bench or toolbox driver where many different screw heads are encountered in one shift. Push-start operation and Smart Stop help keep applied torque consistent on soft or plated fasteners that are easily over-driven by hand.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.