Description
MD24A200-0150COO2NNSD Linear Actuator Electrak MD — BOLTON SKU 68638.
About the MD24A200-0150COO2NNSD Electrak MD Actuator
The MD24A200-0150COO2NNSD linear actuator is a Thomson Electrak MD electric actuator running from a 24 V DC supply through an acme screw drive, rated for a 2,000 N dynamic load at a speed of 5.4 to 7 mm/s depending on loading. This build has a 150 mm stroke, a retracted length of 283.2 mm and a mass of 1.3 kg. It is supplied with internal CANopen control together with open-loop speed control, and terminates in a one-metre cable with flying leads rather than a connector, so it is wired directly into the machine harness. Sealing is IP66 under dynamic conditions and IP67/IP69K static, the actuator is CE compliant, and country of origin is Sweden. At 2,000 N and 1.3 kg this is the light-duty end of the Electrak range, intended for compact positioning rather than heavy lifting.
Key specifications
| Supply voltage | 24 V DC |
|---|---|
| Drive | Acme screw |
| Dynamic load | 2,000 N |
| Speed | 5.4 – 7 mm/s |
| Stroke | 150 mm |
| Retracted length | 283.2 mm |
| Control | Internal CANopen with open-loop speed control |
| Termination | 1 m cable with flying leads |
| Ingress protection | IP66 dynamic; IP67 / IP69K static |
| Mass | 1.3 kg |
Typical applications
At 2,000 N and 1.3 kg the actuator suits light positioning duties: small hatches, louvres, deflectors, adjustable guards, and sensor or antenna mast movements on mobile equipment. The 283.2 mm retracted length allows it to be mounted inside shallow structures where a longer body would not fit. Flying-lead termination makes it straightforward to splice into an existing loom during retrofit work.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.