Description
86303639BLF D-Sub 25 Straight Exit Backshell — BOLTON SKU 61368.
About the 86303639BLF D-Sub 25 Backshell, Straight Exit
This item is a backshell for a 25-way D-subminiature connector, supplied under the part designation 86303639BLF with a straight cable exit. A D-sub backshell is the hood that closes over the rear of a connector once the contacts are terminated, and it does three jobs at once: it encloses and protects the termination joints and the wire break-out, it provides the strain-relief clamp that takes cable pull off those terminations, and in a metal or metallised shell it carries a cable screen through to the connector shell and on to chassis. A straight exit brings the cable away from the connector on the same axis as the mating face, which suits a panel or bulkhead position where the harness runs directly back rather than turning. Shell material, plating, clamp type and included hardware are not stated in the designation and should be confirmed against the manufacturer datasheet at enquiry.
Key specifications
| Part designation | 86303639BLF |
|---|---|
| Product type | D-subminiature backshell / hood |
| Connector size | 25-way D-sub |
| Cable exit | Straight, in line with the mating axis |
Typical applications
Straight-exit backshells are used where a D-sub sits on a panel or card face with clear space behind it, so the harness can run straight back into a loom or cable tray without a bend at the connector. They are a standard choice for rack and enclosure interconnect, instrumentation and test-set cabling, and equipment-to-equipment links built on 25-way D-subs. Where depth behind the connector is restricted, an angled exit backshell is specified in place of this straight version.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Backshells & Strain Relief.
Reviews
There are no reviews yet.