Avionics & Electronics Electronic Components

CRCW080510K0FKEA-RES; 10k0 0,125W ±1% THK FILM CHIP D12 (0805)

MPN
CRCW080510K0FKEA
SKU
67778
Brand
Vishay Dale
Category
Electronic Components
Capability
Avionics & Electronics

CRCW080510K0FKEA-RES; 10k0 0,125W ±1% THK FILM CHIP D12 (0805) — Vishay Dale 10 kilohm ±1% thick film chip resistor rated 0.125 W in the 0805 case size. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

CRCW080510K0FKEA-RES; 10k0 0,125W ±1% THK FILM CHIP D12 (0805) — BOLTON SKU 67778.

About the CRCW080510K0FKEA Resistor, 10k 1% 0805 Chip

The CRCW080510K0FKEA thick film resistor is a Vishay Dale surface-mount chip resistor from the CRCW-e3 series, rated 10 kΩ at ±1% tolerance with a 0.125 W (1/8 W) power dissipation in the 0805 case size — 2.0 mm by 1.25 mm, or 2012 in metric notation. The limiting element voltage is 150 V and the specified operating temperature range runs from -55 °C to +155 °C. Vishay lists the part as AEC-Q200 qualified, which is the automotive passive-component qualification standard and a common screening requirement on industrial and transport programmes as well. Terminations use pure tin over a nickel barrier layer, so the part is intended for standard reflow assembly and resists leach-out during soldering. 10 kΩ at 1% is one of the most widely specified values in the series.

Key specifications

Attribute Value
Manufacturer Vishay Dale
Part number CRCW080510K0FKEA
Resistance 10 kΩ
Tolerance ±1%
Power rating 0.125 W (1/8 W)
Case size 0805 (2012 metric), 2.0 × 1.25 mm
Limiting element voltage 150 V
Operating temperature range -55 °C to +155 °C
Qualification AEC-Q200

Typical applications

A 10 kΩ 1% part at this power rating is the standard choice for pull-ups and pull-downs, bias networks, feedback and gain-setting dividers, ADC input scaling and current-sense trim on digital and mixed-signal boards. The AEC-Q200 qualification and the 155 °C ceiling make it usable in the higher-temperature and vibration-exposed enclosures typical of vehicle, industrial-control and airborne electronics rather than benign benchtop assemblies. The 0805 footprint is chosen where hand-rework or in-circuit test access matters more than the density that 0603 or 0402 would give.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Reviews

There are no reviews yet.

Be the first to review “CRCW080510K0FKEA-RES; 10k0 0,125W ±1% THK FILM CHIP D12 (0805)”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories