Avionics & Electronics Electronic Components

CRCW060315R0FKEA-RES; 15R0 0,1W ±1% THK FILM CHIP (0603)

MPN
CRCW060315R0FKEA
SKU
67791
Brand
Vishay Dale
Category
Electronic Components
Capability
Avionics & Electronics

CRCW060315R0FKEA-RES; 15R0 0,1W ±1% THK FILM CHIP (0603) — 15.0 Ω ±1% thick film chip resistor, 0603 case, 0.10 W at 70 °C. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

CRCW060315R0FKEA-RES; 15R0 0,1W ±1% THK FILM CHIP (0603) — BOLTON SKU 67791.

About the CRCW060315R0FKEA Resistor, 15 ohm 1% 0603

The Vishay global part number resolves field by field: CRCW0603 identifies the D11/CRCW0603 e3 standard thick film chip resistor, 15R0 encodes the resistance using the R/K/M decimal convention (15.0 Ω), F sets the resistance tolerance at ±1%, K sets the temperature coefficient of resistance at ±100 ppm/K, and EA is the lead-free packaging code for a 5,000-piece 180 mm (7-inch) reel. The 15R0 field places the decimal point at R, giving 15.0 ohms. In the 0603 case the datasheet gives a rated dissipation of 0.10 W at 70 °C, a maximum operating voltage of 75 V AC RMS or DC and a one-minute insulation withstand of 100 V against the ambient. The operating temperature range is −55 °C to +155 °C with a permissible film temperature of 155 °C. Construction follows the series pattern of a laser-trimmed cermet film on alumina with a protective overcoat and pure matte tin over nickel terminations, qualified to AEC-Q200.

Key specifications

Manufacturer part number CRCW060315R0FKEA
Manufacturer Vishay Dale
Resistance 15.0 Ω
Tolerance ±1% (code F)
Temperature coefficient ±100 ppm/K (code K)
Case size 0603 (D11/CRCW0603 e3)
Rated dissipation at 70 °C 0.10 W
Maximum operating voltage 75 V AC RMS / DC
Operating temperature −55 °C to +155 °C
Packaging code EA — lead-free, 5,000 pieces on a 180 mm reel

Typical applications

A 15 Ω part in the smaller 0603 outline is generally placed close to a driver pin, where board area is tight: series termination on clock and single-ended data lines to control overshoot, damping in gate-drive paths, and current setting for indicator LEDs on low-voltage rails. The 0603 case trades power headroom for density, so the 0.10 W rating and 75 V ceiling leave less margin than the 0805 equivalent and are worth checking against worst-case duty.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Reviews

There are no reviews yet.

Be the first to review “CRCW060315R0FKEA-RES; 15R0 0,1W ±1% THK FILM CHIP (0603)”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories