Tools & Workshop Adhesives & Tapes

Permabond ET5429 Slow Structural Epoxy Adhesive, 400 ml

MPN
ET5429-400
SKU
70518
Brand
Permabond
Category
Adhesives & Tapes
Capability
Tools & Workshop

Permabond ET5429 Slow Structural Epoxy Adhesive, 400 ml — two-part toughened structural epoxy in a 400 ml twin cartridge, mixed 2:1. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

Permabond ET5429 Slow Structural Epoxy Adhesive, 400 ml — BOLTON SKU 70518.

About the Permabond ET5429-400 Structural Epoxy, 400 ml

The ET5429-400 structural epoxy adhesive is the 400 ml cartridge presentation of Permabond ET5429, a two-part toughened epoxy mixed at a 2:1 ratio. The formulation is thixotropic, so it can be applied to vertical surfaces without slumping and will bridge bond gaps of up to 5 mm. It is a slow-setting grade: working life is 120 to 240 minutes, handling strength is reached in roughly 360 to 600 minutes, and full cure takes three days. Permabond publishes retention of approximately 50 per cent of maximum strength at 105 °C, and the toughened chemistry is intended to resist impact and vibration. Listed substrates include composites, metals, thermoset plastics, wood and ceramics. The 400 ml cartridge is dispensed with a matching 2:1 applicator gun and a static mixer nozzle.

Key specifications

Attribute Value
Product Permabond ET5429
Type Two-part toughened structural epoxy
Mix ratio 2:1
Working life 120–240 minutes
Handling strength 360–600 minutes
Full cure 3 days
Elevated temperature Approx. 50% of maximum strength retained at 105 °C
Gap fill Up to 5 mm
Cartridge size 400 ml
Dispensing 2:1 applicator gun with static mixer nozzle

Typical applications

The long working life of this grade suits larger bonded assemblies where the whole joint must be laid up and clamped before the adhesive begins to set, which is why it is used on composite panel and structure bonding. Its gap-filling, non-slump consistency makes it practical for vertical and overhead joints and for bonds between parts with loose fit-up. The elevated-temperature retention figure makes it a candidate where a bonded joint sees warm service rather than ambient only.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Structural Adhesives Epoxies.

Reviews

There are no reviews yet.

Be the first to review “Permabond ET5429 Slow Structural Epoxy Adhesive, 400 ml”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories