Avionics & Electronics Passives & Semiconductors

CT1206K50G Metal Oxide Varistor 120pF 1A, Clamping 135V, Varistor 82V, 1206 (3216M)

MPN
CT1206K50G
SKU
67793
Brand
EPCOS
Category
Passives & Semiconductors
Capability
Avionics & Electronics

CT1206K50G Metal Oxide Varistor 120pF 1A, Clamping 135V, Varistor 82V, 1206 (3216M) — multilayer ceramic chip varistor for transient suppression in a 1206 package. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

CT1206K50G Metal Oxide Varistor 120pF 1A, Clamping 135V, Varistor 82V, 1206 (3216M) — BOLTON SKU 67793.

About the CT1206K50G Varistor, 82V, 1206 Chip

The CT1206K50G metal oxide varistor is an EPCOS multilayer ceramic chip varistor from the CT series of ceramic transient voltage suppressors, supplied in the 1206 case size (3216 metric, nominally 3.2 mm × 1.6 mm). Its varistor voltage is 82 V, measured at the standard 1 mA point, and its clamping voltage is 135 V at 1 A. Maximum continuous operating voltage is 50 V AC rms or 65 V DC, and maximum surge current is 100 A with an energy rating of 0.6 J. Typical capacitance is 120 pF, which is the figure to check when the part sits across a signal line rather than a supply rail. Terminations are nickel-barrier for solderability and leach resistance. CT is the EPCOS designation for its ceramic transient voltage suppressor chip range.

Key specifications

Attribute Value
Part number CT1206K50G (EPCOS)
Technology Multilayer ceramic chip varistor
Package 1206 (3216 metric), approx. 3.2 × 1.6 mm
Varistor voltage 82 V
Clamping voltage 135 V at 1 A
Max operating voltage 50 V AC rms / 65 V DC
Max surge current 100 A
Energy rating 0.6 J
Capacitance 120 pF
Terminations Nickel barrier

Typical applications

With a 50 V AC / 65 V DC continuous rating, this variant is aimed at low-voltage board-level protection rather than mains circuits — suppressing switching and inductive transients on DC supply rails, relay and solenoid drive lines, and interface pins on control boards. The 120 pF capacitance is low enough for many slower data and control lines but should be checked against the signal edge rate. Surface-mount 1206 construction suits high-density boards where a leaded disc varistor will not fit.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Passives Semiconductors.

Reviews

There are no reviews yet.

Be the first to review “CT1206K50G Metal Oxide Varistor 120pF 1A, Clamping 135V, Varistor 82V, 1206 (3216M)”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories