Avionics & Electronics Electronic Components

ETX18B 13.2V , 6AH , 4 Cell LifePO4, Rechargeable

MPN
ETX18B
SKU
66151
Brand
EarthX
Category
Electronic Components
Capability
Avionics & Electronics

ETX18B 13.2V , 6AH , 4 Cell LifePO4, Rechargeable — four-cell lithium iron phosphate battery, 13.2 V nominal, 6.2 Ah at the 1C rate, 230 CCA, weighing 1.0 kg. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

ETX18B 13.2V , 6AH , 4 Cell LifePO4, Rechargeable — BOLTON SKU 66151.

About the ETX18B 13.2V 6Ah LiFePO4 Battery, EarthX

The ETX18B LiFePO4 battery from EarthX is a rechargeable four-cell lithium iron phosphate pack with a nominal voltage of 13.2 V, the figure that follows from four LiFePO4 cells in series. Capacity is quoted as 6.2 Ah at the 1C rate. Cranking performance is stated as 230 cold cranking amps and 340 peak cranking amps, so it is characterised as a starting battery rather than as a deep-cycle house battery. The pack weighs 2.2 lb (1.0 kg), which is the principal reason lithium iron phosphate is selected over lead-acid in this size class. It is built to case size B, measuring 5.3 in long by 2.6 in wide by 4.1 in high, or 135 mm × 66 mm × 105 mm, so the tray, hold-down and terminal orientation of the outgoing battery should be checked against those dimensions when it is being considered as a replacement.

Key specifications

Chemistry Lithium iron phosphate (LiFePO4)
Cell configuration 4 cells in series
Nominal voltage 13.2 V
Capacity (1C rate) 6.2 Ah
Cold cranking amps (CCA) 230
Peak cranking amps (PCA) 340
Weight 2.2 lb (1.0 kg)
Case size B
Dimensions 135 mm × 66 mm × 105 mm (5.3 × 2.6 × 4.1 in)

Typical applications

A 1.0 kg battery delivering 230 CCA is chosen where mass reduction is the driver and the duty is engine starting with a modest standing load — light aircraft, powersports and small engine installations are the usual case size B fitments. The 6.2 Ah capacity sets the realistic reserve if charging is lost, so essential-load endurance should be calculated rather than assumed from the lead-acid battery being replaced. LiFePO4 packs also require a charging system whose voltage profile suits the chemistry.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Reviews

There are no reviews yet.

Be the first to review “ETX18B 13.2V , 6AH , 4 Cell LifePO4, Rechargeable”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories