Description
EP-L160-5 EL160 High-Temperature Epoxy Laminating Resin, 5 kg Kit — BOLTON SKU 66537.
About the EP-L160-5 High-Temp Epoxy Laminating Resin, 5 kg
The EP-L160-5 EL160 High-Temperature Epoxy Laminating Resin is a 5 kg kit of Easy Composites’ EL160 system, a two-part epoxy developed for hand lay-up of high-temperature composite components and moulds. Easy Composites positions EL160 for service up to 170 degC, with a maximum glass transition temperature of 170 degC measured by TMA when correctly cured, and notes good wet-out of high-performance reinforcements such as carbon and aramid fibre. The published mix ratio is 100 parts resin to 35 parts hardener by weight, and the mixed resin has a density of 1.10 g/ml at 25 degC with a pale yellow colour. As with all elevated-temperature epoxy systems, the stated thermal performance depends on following the manufacturer’s cure and post-cure schedule.
Key specifications
| Manufacturer / MPN | Easy Composites EP-L160-5 |
|---|---|
| System | EL160 two-part epoxy laminating resin |
| Kit size | 5 kg |
| Service temperature | Up to 170 degC (correctly post-cured) |
| Glass transition (Tg) | Up to 170 degC (TMA) |
| Mix ratio | 100 : 35 resin to hardener, by weight |
| Density | 1.10 g/ml at 25 degC |
Typical applications
Used for hand laminating carbon- and aramid-reinforced parts that must hold their properties at elevated temperature, and for building high-temperature composite tooling and moulds. It suits workshop-scale prototype and repair laminating where an oven post-cure can be applied.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Structural Adhesives Epoxies.
Reviews
There are no reviews yet.