Description
Ball Damper RJX3816, 2.35x8x13.6mm, Silicone — BOLTON SKU 59196.
About the RJX3816 Ball Damper, 2.35x8x13.6mm Silicone
The RJX3816 is a moulded silicone anti-vibration damper with a nominal size designation of 2.35 x 8 x 13.6 mm, the longer 13.6 mm dimension distinguishing it from compact ball dampers such as the RJX3793. Elastomeric dampers of this kind mount between a vibration source and the isolated equipment, seating into matching holes or grommet plates so that the silicone body carries the load in shear and compression and dissipates high-frequency vibration as heat. Silicone is preferred for the duty because it retains elasticity across a wide temperature range and resists compression set in continuous service. The 2.35 mm figure in the designation indicates the smallest (bore/waist class) dimension of the moulding and the 8 mm figure its body diameter class; verify exact fitment geometry and hardness against your mounting design at RFQ stage, as the designation alone does not state them.
Key specifications
| Designation | RJX3816 |
|---|---|
| Type | Anti-vibration damper, ball/barrel style |
| Material | Silicone |
| Nominal size | 2.35 x 8 x 13.6 mm |
Typical applications
This elongated damper size is used where a taller isolation stack is needed than a standard camera ball provides, such as isolating gimbal carriers, GPS masts or small avionics trays on UAV airframes. Its extra height gives more compliant travel for lower-frequency vibration than compact 6 mm-class balls.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.