Description
Brushless DC Axial Fan, 24V, 0.480A, 6.48W, 10-70 Degrees, 5000 RPM — BOLTON SKU 59088.
About the D8026Y24BPLP1b-7 Axial Fan, 24 V, 5000 RPM
The D8026Y24BPLP1b-7 brushless DC axial fan is built on an 80 x 80 mm frame and is the higher-output member of this pair of 24 V fans. It draws 0.480 A at 24 V DC for a rated power of 6.48 W and turns at 5000 rpm. Compared with the 70 mm variant in the same family, the larger frame and higher speed together represent a substantial step up in air-moving capability, with the current draw rising accordingly — a point worth checking against the available headroom on the 24 V rail before specifying it as a drop-in replacement. Brushless construction avoids brush wear, and the 80 mm square footprint is one of the most common openings already cut into industrial enclosures, panels and rack chassis, which usually makes retrofitting a mechanical rather than a fabrication job.
Key specifications
| Model | D8026Y24BPLP1b-7 |
|---|---|
| Type | Brushless DC axial fan |
| Frame size | 80 x 80 mm |
| Rated voltage | 24 V DC |
| Rated current | 0.480 A |
| Rated power | 6.48 W |
| Rated speed | 5000 rpm |
Typical applications
At 6.48 W and 5000 rpm this fan targets enclosures with a genuine heat load rather than incidental warming — power conversion equipment, motor drive cabinets, higher-density electronics racks and equipment operating in warm ambient conditions. The 80 mm frame is the usual choice where a 60 or 70 mm fan has proved marginal but the panel cannot accommodate a 120 mm aperture. It is often installed as an extract fan opposite a filtered inlet so that air is drawn across the hottest components.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.