Avionics & Electronics Distribution & Control

B-WIT 100 – Wideband Injection Transformer

MPN
B-WIT 100
SKU
66566
Brand
OMICRON Lab
Category
Distribution & Control
Capability
Avionics & Electronics

B-WIT 100 – Wideband Injection Transformer — OMICRON Lab signal injection transformer with a 1 Hz to 10 MHz usable range and a 1:1 turns ratio. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

B-WIT 100 – Wideband Injection Transformer — BOLTON SKU 66566.

About the B-WIT 100 Injection Transformer, Wideband

The B-WIT 100, order reference P0005758, is an injection transformer made by OMICRON Lab for control loop and frequency response measurement. Its job is to couple a swept disturbance signal from an analyser into a live feedback loop while keeping the analyser galvanically isolated from the circuit under test, so the loop’s own DC operating point is not disturbed. OMICRON Lab gives a usable frequency range of 1 Hz to 10 MHz, with a typical -3 dB range of 7 Hz to 5 MHz, a 1:1 primary to secondary turns ratio, insertion loss below 0.5 dB at 10 kHz and a typical capacitance of 120 pF at 1 kHz. It is rated for safe isolation at 600 V CAT II. The wide span means the same B-WIT 100 wideband injection transformer can be used on slow loops with low bandwidth and on fast loops alike.

Key specifications

Attribute Value
Manufacturer OMICRON Lab
Model B-WIT 100
Order reference P0005758
Usable frequency range 1 Hz to 10 MHz
-3 dB frequency range 7 Hz to 5 MHz (typical)
Turns ratio 1:1 primary to secondary
Insertion loss Below 0.5 dB at 10 kHz
Capacitance 120 pF at 1 kHz (typical)
Isolation rating 600 V CAT II

Typical applications

An injection transformer of this class is used with a vector network analyser or frequency response analyser to measure control loop gain and phase margin on switch-mode power supplies, DC-DC converters, linear regulators and motor drive loops. The same setup is used for power supply rejection ratio and output impedance measurements. Its 1 Hz lower limit matters for slow loops such as power factor correction stages, while the 10 MHz upper limit covers fast point-of-load converters.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Distribution Control.

Reviews

There are no reviews yet.

Be the first to review “B-WIT 100 – Wideband Injection Transformer”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories