Avionics & Electronics Lighting

EA PLUGL128-6GTC 2.9″ Touch OLED Display Module, 128 x 64

MPN
EA PLUGL128-6GTC
SKU
70885
Brand
Display Visions
Category
Lighting
Capability
Avionics & Electronics

EA PLUGL128-6GTC 2.9″ Touch OLED Display Module, 128 x 64 — 2.9 in yellow passive-matrix OLED module, 128 x 64 pixels, with capacitive touch panel and I²C, SPI, RS-232 and USB interfaces. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

EA PLUGL128-6GTC 2.9″ Touch OLED Display Module, 128 x 64 — BOLTON SKU 70885.

About the EA PLUGL128-6GTC OLED Module, 128×64 Touch

The EA PLUGL128-6GTC OLED display module from Display Visions is a 2.9 in (73.66 mm) graphic panel with a 128 x 64 pixel yellow passive-matrix OLED and a capacitive touch overlay on the front. It is an intelligent module rather than a bare glass: the on-board controller presents I²C, SPI, RS-232 and USB interfaces, so it can be driven from a microcontroller or straight from a PC without a display driver of the integrator’s own. The module measures approximately 82 x 67 x 15 mm on a 26-pin connection and runs from a 3.1 to 5.25 V DC supply. Being OLED, it emits its own light, needs no backlight, and holds a viewing angle of about 170°, with a specified operating range of −40 °C to +80 °C and response times in the microsecond region even at the cold end. Additional digital and analogue I/O lines are brought out on the same module.

Key specifications

Manufacturer part number EA PLUGL128-6GTC
Display technology Passive-matrix OLED, yellow
Diagonal 2.9 in (73.66 mm)
Resolution 128 x 64 pixels
Touch Capacitive touch panel
Interfaces I²C, SPI, RS-232, USB
Module dimensions approx. 82 x 67 x 15 mm, 26-pin
Supply voltage 3.1 – 5.25 V DC
Operating temperature −40 °C to +80 °C
Viewing angle approx. 170°

Typical applications

A 128 x 64 touch OLED of this size is used as a local operator panel on instruments, test rigs and control boxes, where a few menu pages and soft keys replace a membrane keypad. The wide −40 °C to +80 °C range and the absence of a backlight suit unheated cabinets, outdoor enclosures and vehicle-mounted equipment. USB and RS-232 support also make it convenient as a status display bolted onto an existing PC-based system.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Lighting.

Reviews

There are no reviews yet.

Be the first to review “EA PLUGL128-6GTC 2.9″ Touch OLED Display Module, 128 x 64”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories