Avionics & Electronics Heat-Shrink & Sleeving

TUBING,HEAT SHRINK,3:1 RATIO,1/8IN,CLEAR,POLYOLEFIN, ADHESIVE LINED

SKU
59609
Category
Heat-Shrink & Sleeving
Capability
Avionics & Electronics

TUBING,HEAT SHRINK,3:1 RATIO,1/8IN,CLEAR,POLYOLEFIN, ADHESIVE LINED — clear adhesive-lined polyolefin heat-shrink sleeving with a 3:1 shrink ratio and 1/8 in supplied size. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

TUBING,HEAT SHRINK,3:1 RATIO,1/8IN,CLEAR,POLYOLEFIN, ADHESIVE LINED — BOLTON SKU 59609.

About the TUBING,HEAT SHRINK,3:1 RATIO,1/8IN,CLEAR,POLYOLEFIN

Supplied as tubing heat shrink 3 1 ratio sleeving, this is a dual-wall heat-shrinkable product: a cross-linked polyolefin outer wall with an adhesive inner lining, supplied in the 1/8 in nominal size with a 3:1 shrink ratio and a clear finish. When heat is applied the outer wall recovers towards roughly one third of its supplied diameter while the inner lining melts and flows into the gaps around the substrate, so on cooling the sleeve is both mechanically gripped and adhesively sealed rather than simply clamped. The 3:1 ratio means one size covers a wider span of underlying diameters than a 2:1 product, which is useful over stepped transitions such as a conductor emerging from a larger jacket or a solder joint that is thicker than the wire behind it. The clear wall leaves the joint, marking or conductor colour visible after recovery, which supports inspection without cutting the sleeve back.

Key specifications

Product type Dual-wall adhesive-lined heat-shrink tubing
Outer wall material Polyolefin
Inner wall Adhesive lined
Shrink ratio 3:1
Nominal supplied size 1/8 in
Colour Clear

Typical applications

Adhesive-lined sleeving in a small 1/8 in size is used on fine-gauge terminations: sealing solder sleeves and inline splices on signal wiring, moisture-sealing the back of crimped contacts, providing strain relief where a conductor leaves a connector, and covering breakouts on sensor and instrumentation leads. The clear wall allows the underlying splice or wire marker to be verified after shrinking, so it is often preferred over coloured sleeving on harnesses that are subject to visual inspection.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Heat-Shrink & Sleeving.

Reviews

There are no reviews yet.

Be the first to review “TUBING,HEAT SHRINK,3:1 RATIO,1/8IN,CLEAR,POLYOLEFIN, ADHESIVE LINED”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories