Avionics & Electronics Circular / Rectangular Connectors

LiPo Rechargeable Battery 4000 mAh, 7.6 V, 2S

SKU
53908
Category
Circular / Rectangular Connectors
Capability
Avionics & Electronics

LiPo Rechargeable Battery 4000 mAh, 7.6 V, 2S — rechargeable lithium-polymer pack, 4000 mAh capacity, 7.6 V nominal, two cells in series. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

LiPo Rechargeable Battery 4000 mAh, 7.6 V, 2S — BOLTON SKU 53908.

About the LiPo Rechargeable Battery 4000 mAh 7.6

This battery lipo rechargeable 4000 mah pack is a two-cell lithium-polymer assembly with a nominal terminal voltage of 7.6 V. The 2S designation means two cells connected in series, and dividing the pack voltage by the cell count gives 3.8 V per cell — the nominal figure for high-voltage lithium-polymer chemistry rather than the 3.7 V of a conventional LiPo cell. That distinction matters in service, because a high-voltage pack has a higher fully charged voltage per cell than a standard LiPo and requires a charger set to the correct chemistry; charging it on a standard LiPo profile will not fill it, and the reverse error is hazardous. At 4.0 Ah and 7.6 V the pack stores approximately 30 Wh of energy. Lithium-polymer cells are subject to dangerous-goods rules in transport and require balance charging, temperature-controlled storage and storage at a partial state of charge.

Key specifications

Attribute Value
Chemistry Lithium-polymer (LiPo), rechargeable
Capacity 4000 mAh (4.0 Ah)
Nominal voltage 7.6 V
Cell configuration 2S (two cells in series)
Nominal cell voltage 3.8 V per cell (high-voltage LiPo)
Nominal energy Approx. 30 Wh

Typical applications

A 2S 7.6 V pack at 4000 mAh is a payload and avionics power source rather than a main propulsion pack: powering ground-control and radio equipment, camera and gimbal payloads, handheld and portable instruments, small UAS airframes and test rigs. The high-voltage 3.8 V per cell chemistry is chosen where slightly more usable energy and a higher working voltage are wanted from the same physical two-cell footprint.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Uav Power Energy.

Reviews

There are no reviews yet.

Be the first to review “LiPo Rechargeable Battery 4000 mAh, 7.6 V, 2S”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories