Avionics & Electronics Heat-Shrink & Sleeving

DR-25-1-1/2-0-SP Heat-Shrink Tubing, Black, 38.1mm Sleeve

SKU
60747
Brand
TE Connectivity (Raychem)
Category
Heat-Shrink & Sleeving
Capability
Avionics & Electronics

DR-25-1-1/2-0-SP Heat-Shrink Tubing, Black, 38.1mm Sleeve — Raychem DR-25 flexible, fluid-resistant elastomeric heat-shrink sleeve in the 1-1/2 in (38.1 mm) size, black, supplied on spool. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

DR-25-1-1/2-0-SP Heat-Shrink Tubing, Black, 38.1mm Sleeve — BOLTON SKU 60747.

About the DR-25-1-1/2-0-SP Heat-Shrink Tubing, Black, 38.1mm

Raychem DR-25 is a flexible, fluid-resistant elastomeric heat-shrinkable tubing used where wiring harnesses are exposed to fluids, abrasion and sustained heat. The material is rated for continuous operation from -75 °C to +150 °C and offers long-term heat and fluid resistance at elevated temperature. The tubing recovers to half of its as-supplied diameter, so this 1-1/2 in size enters service at a 38.1 mm internal diameter and shrinks down over the bundle, connector backshell or splice beneath it. The part number breaks down as DR-25 material, 1-1/2 in size, colour code 0 for black, and the SP suffix denoting spooled supply. This particular dr-25-1-1/2-0-sp heat shrink tubing black reference is cut and supplied in 1.2 m lengths from the spool. Confirm recovered dimensions against your bundle diameter before ordering.

Key specifications

Attribute Value
Series Raychem DR-25 (TE Connectivity)
Size 1-1/2 in — 38.1 mm as-supplied internal diameter
Colour Black (part-number code 0)
Shrink ratio 2:1 — recovers to half the supplied diameter
Material Flexible, fluid-resistant elastomer
Operating temperature -75 °C to +150 °C
Supply form Spool (SP suffix); cut in 1.2 m lengths

Typical applications

At 38.1 mm supplied diameter this size suits larger trunk harnesses, multi-way connector backshell transitions and bundled looms that a smaller sleeve cannot pass over. The fluid-resistant elastomer makes it a common choice in engine bays, hydraulic zones and other areas where oils and fuels contact the loom. Black is the usual selection where the sleeve is not required to carry printed identification.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Heat-Shrink & Sleeving.

Reviews

There are no reviews yet.

Be the first to review “DR-25-1-1/2-0-SP Heat-Shrink Tubing, Black, 38.1mm Sleeve”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories