Description
Fluke 62 MAX Infrared Thermometer — BOLTON SKU 50456.
About the Fluke 62 MAX Infrared Thermometer
Fluke 62 MAX test equipment covers the handheld infrared thermometer that measures surface temperature from -30 °C to 500 °C (-22 °F to 932 °F) without contact, to an accuracy of ±1.5 °C or ±1.5% of reading, whichever is greater. Its optical resolution is 10:1 calculated at 90% energy, meaning the measured spot is a tenth of the distance to the target — at two metres the instrument is averaging a 200 mm circle, which is the figure that decides whether a small component can be read individually. Emissivity is adjustable from 0.10 to 1.00, so the reading can be corrected for shiny, painted or oxidised surfaces rather than assuming a fixed value. Response time is under 500 ms to 95% of reading, and a single laser marks the centre of the measurement area. The instrument is sealed to IP54 per IEC 60529 and rated for a three-metre drop.
Key specifications
| Attribute | Value |
|---|---|
| Manufacturer | Fluke |
| Model | 62 MAX |
| Temperature range | -30 °C to 500 °C (-22 °F to 932 °F) |
| Accuracy | ±1.5 °C or ±1.5% of reading, whichever is greater |
| Distance-to-spot ratio | 10:1 (at 90% energy) |
| Emissivity | Adjustable 0.10 to 1.00 |
| Response time | < 500 ms (95% of reading) |
| Ingress protection | IP54 per IEC 60529 |
| Drop rating | 3 metres |
| Power | 1 x AA battery, approx. 10 hours with laser and backlight on |
Typical applications
The -30 °C to 500 °C span puts refrigeration and HVAC surfaces at one end and motor, bearing, exhaust and process-pipe temperatures at the other, which is the working range for maintenance rounds and fault-finding rather than furnace or metallurgy work. The IP54 sealing and three-metre drop rating are what make it a walk-around instrument for plant, workshop and flight-line use rather than a bench device. Adjustable emissivity matters in these environments because bare metal, insulation and painted surfaces on the same machine would otherwise read very differently.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.