Description
63ZLJ2200M16X40 Electrolytic Capacitor 2200uF 20% 63V 105 °C Radial — BOLTON SKU 56589.
About the 63ZLJ2200M16X40 Capacitor, 2200uF 63V 105C
This is a Rubycon aluminium electrolytic capacitor whose part number encodes the full rating: 63 V DC working voltage, ZLJ series, 2200 µF nominal capacitance, tolerance code M for ±20 %, in a can of 16 mm diameter by 40 mm height. ZLJ belongs to Rubycon’s low-impedance miniature range, the family used where a capacitor must carry significant ripple current at switching frequencies rather than simply hold charge. The part is a polarised, radial-leaded component intended for through-hole mounting, and it is rated for a 105 °C category temperature, which is the usual requirement for parts sitting close to switching semiconductors or magnetics inside an enclosure. Selection should always be checked against the ripple current, ESR and endurance figures on the current Rubycon datasheet for the operating temperature you expect.
Key specifications
| Attribute | Value |
|---|---|
| Manufacturer | Rubycon |
| Series | ZLJ (low-impedance miniature aluminium electrolytic) |
| Capacitance | 2200 µF |
| Capacitance tolerance | ±20 % (code M) |
| Rated voltage | 63 V DC |
| Case size | 16 mm diameter × 40 mm height |
| Rated temperature | 105 °C |
| Mounting | Radial leaded, through hole |
| Polarity | Polarised |
Typical applications
A 2200 µF part at 63 V in a low-impedance series is normally used as bulk or DC-link capacitance: smoothing the output of a rectifier, holding up a switch-mode supply rail, or decoupling the DC bus of a motor drive or electronic speed controller where the working voltage sits comfortably below 63 V. The 16 × 40 mm can is a through-hole size for power boards rather than for dense signal assemblies, and the 105 °C rating suits placement inside a warm chassis. Confirm ripple-current duty and the required endurance rating with your enquiry.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.