Description
TS101 Smart Programmable Soldering Iron 90W PD with BC2 Tip — BOLTON SKU 62666.
About the TS101 Programmable Soldering Iron, 90 W PD
The TS101 is a compact, programmable soldering iron with dual power inputs: USB-C Power Delivery and a DC5525 barrel jack accepting 9–24 V. Maximum output power is 90 W (USB-C PD3.1; standard PD3.0 input supports lower power, with 90 W PD operation enabled via firmware). The adjustable temperature range spans 50–400 °C, and the iron can reach 400 °C in approximately 9 seconds under adequate supply power. An OLED display and button interface allow direct temperature setting and monitoring, and the iron accepts interchangeable tips — this unit ships with the BC2 (bevel) tip fitted. The flexible power options allow bench use from a PD supply or field use from a battery pack or vehicle supply.
Key specifications
| Maximum power | 90 W |
|---|---|
| Power input | USB-C PD or DC5525, 9–24 V DC |
| Temperature range | 50–400 °C, adjustable |
| Heat-up | Approx. 9 s to 400 °C |
| Display | OLED with push-button control |
| Tip supplied | BC2 (interchangeable tip system) |
Typical applications
Portable smart irons of this type serve electronics assembly and repair on benches and in the field — cable and connector work, PCB rework and UAV electronics maintenance where mains-powered soldering stations are impractical. The wide DC input range makes it usable from portable power sources during line-side or deployed maintenance tasks.
Frequently asked questions
Can the TS101 run from a power bank? Yes — it accepts USB-C Power Delivery input, with deliverable wattage depending on the source; full 90 W operation requires a PD3.1 supply.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Soldering Irons Stations.
Reviews
There are no reviews yet.