Description
SENKO IP21DA2-01 Adapter Dust Cap — BOLTON SKU 54600.
About the SENKO IP21DA2-01 Adapter Dust Cap
The SENKO IP21DA2-01 Adapter connector accessory is a dust cap for the adapter side of the IP21 series, not for the connector. That distinction governs which part to order: an adapter cap closes the port on a panel, coupler or enclosure bulkhead, whereas a connector cap covers the plug on the end of a cable. The two are not interchangeable and both are usually needed on the same installation, in different quantities, since a panel will carry unused ports as well as terminated leads. Capping an unused port keeps dust, moisture and insects out of the alignment sleeve, which is difficult to clean once contaminated and which will degrade every connector subsequently mated into it. The record states the brand, the IP21DA2-01 part number and that the cap is for an adapter; material, colour, tether provision and sealing rating are not stated and should be confirmed on the quotation.
Key specifications
| Brand | SENKO |
|---|---|
| Part number | IP21DA2-01 |
| Series | IP21 |
| Product type | Dust cap |
| Fits | Adapter / port side |
Typical applications
Adapter caps are fitted to spare and unused ports on patch panels, breakout enclosures and equipment bulkheads, from installation onward and again whenever a lead is withdrawn. On deployable and outdoor installations they are what keeps an unused port serviceable between deployments. They are ordered against the port count of the panel rather than the number of leads, so the two cap types are usually quoted in different quantities on the same enquiry.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.