Description
FUTABA J-M CONN FUTABA IN-LINE RCPTCL 3 PIN M CRIMP — BOLTON SKU 70200.
About the Futaba J-M In-Line Receptacle, 3-Pin Male
This is the male half of the Futaba J connector, the standard three-pin in-line interface used across Futaba-style servos, receivers and radio-control accessories. The J pattern places three contacts on a 2.54 mm (0.1 in) pitch; the male connector carries a polarising slot that accepts the alignment rib on the mating female half, enforcing correct orientation so signal and supply lines cannot be reversed at mating. The connector is assembled by crimping contacts onto discrete leads — typically 22-26 AWG servo wire — and inserting them into the housing, which makes it the building block for custom servo extensions, Y-leads and harnesses. The three positions carry signal, positive supply and negative supply between a receiver or flight controller and the servo. It mates with the corresponding Futaba J female (plug) connector, also available from BOLTON.
Key specifications
| Type | In-line servo connector receptacle, male, crimp termination |
|---|---|
| Pattern | Futaba J |
| Positions | 3 |
| Pitch | 2.54 mm (0.1 in) |
| Polarisation | Keyed slot for alignment rib |
| Wire range | Typically 22-26 AWG servo leads |
Typical applications
Futaba J connectors are the standard servo interface on UAV and radio-control platforms, connecting servos, receivers and flight controllers. Crimp housings like this one are used on integration benches and in MRO workshops to build servo extensions and repair harness connectors.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Circular / Rectangular Connectors.
Reviews
There are no reviews yet.