Avionics & Electronics Circular / Rectangular Connectors

1698-01C USB 3.0 Panel-Mount A Ext. CL2

MPN
1698-01C
SKU
69464
Brand
DataPro
Category
Circular / Rectangular Connectors
Capability
Avionics & Electronics

1698-01C USB 3.0 Panel-Mount A Ext. CL2 — DataPro panel-mount USB Type-A extension, panel-mountable female jack to male plug, 1 ft, CL2 rated. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

1698-01C USB 3.0 Panel-Mount A Ext. CL2 — BOLTON SKU 69464.

About the 1698-01C USB 3.0 Panel-Mount A Ext.

The 1698-01C is a panel-mount USB extension from DataPro’s 1698 series. Each assembly carries a panel-mountable USB Type-A female connector on one end and a standard USB Type-A male connector on the other, so an enclosure, console or rack can present a serviceable USB port on its outer face while the plug end lands on a host port or board header inside. DataPro lists the series in eight lengths under the part numbers 1698-0006C through 1698-15C; the -01C code in this designation is the 1 ft version. The cable is CL2 rated for in-wall use and is built with 28 and 24 AWG conductors under an aluminium/Mylar foil wrap plus braided shielding. Panel cut-out and allowable panel depth differ between published revisions of this series, so the mounting detail should be confirmed against the current manufacturer drawing before the part is committed to a panel design.

Key specifications

Type Panel-mount extension cable
Interface USB Type-A
Configuration Panel-mountable Type-A female to Type-A male
Length 1 ft (part code -01C)
Series part numbers 1698-0006C to 1698-15C (eight lengths)
Conductors 28 and 24 AWG
Shielding Aluminium/Mylar foil wrap plus braided shield
Cable rating CL2 (rated for in-wall use)

Typical applications

Panel-mount extensions bring a USB port from a board or single-board computer inside a box out to a face the operator can actually reach, instead of leaving a bare connector floating behind a cut-out. At 1 ft the -01C suits a short hop inside a small enclosure, an instrument front panel or a vehicle console. The CL2 jacket and braided shield suit fixed installation work, where the run is dressed into a chassis and left in place rather than repeatedly handled.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Data & Ethernet Connectors.

Reviews

There are no reviews yet.

Be the first to review “1698-01C USB 3.0 Panel-Mount A Ext. CL2”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories